This page allows you to get pricing information for our TactileHead Pressure Measurement System.

All TactileHead Pressure Measurement Systems include the following components:

  • T4500 interface electronics with USB 2.0
  • Chameleon Visualization and Data Acquisition Software
  • Synchronized video capture function and hardware
  • Remote Installation and Training

The following table captures all available TactileHead Pressure Measurement Sensor designs. To view images of these designs, click on the purple sensor model numbers below. 

Sensor Model
Sensor Size (mm)
Spatial Resolution (mm)
FSR (PSI)
Thickness (mm)
Material
3440 122 x 122
3.8 x 3.8
2 1 Conformable
5766 122 x 122 with hole in middle
3.8 x 3.8
2 1 Conformable
6425 64 x 64 2 x 2
2 1 Conformable

IN ORDER TO GET PRICING, PLEASE PROCEED TO CHOOSING YOUR PREFERRED SYSTEM CONFIGURATION  HERE BELOW.

System Number
Description
Order
5751 Un-mounted conformable sensor (sensor 3440 or 6425)
5752 Un-mounted conformable sensor with a hole in the middle (sensor model 5766)
5753 Two un-mounted sensors, one with hole (5766) and one without hole (3440 or 6425)
5750
  • Half head fixture with an adjustable mechanism and a flat plate
  • Two conformable sensors mounted on the half headform (sensors 3440 or 6425)
  • Second set of T4500 interface electronics with USB 2.0
5749
  • Half head fixture with an adjustable mechanism and a flat plate
  • Two conformable sensors mounted on the half headform (sensors 3440 or 6425)
  • One un-mounted conformable sensor with hole in the middle (sensor model 5766)
  • One un-mounted conformable sensor (sensor 3440 or 6425)
  • Second set of T4500 interface electronics with USB 2.0